Archive of ‘Projects’ category

Powder Room Face Lift

We found our townhouse when we weren’t even seriously looking to move. We saw this house had popped up via foreclosure and when we went for a walk through we knew that the opportunity was too good to pass up. The house was in no means unlivable (compared to my old condo—which upon seeing it for the first time with my father I literally cried while he was like a child in a candy store). The house just needed a bit of TLC and some elbow grease, which we were more than willing to do.

It’s been a process, but we’ve chipped our way along most of the rooms in the house, trying to turn the damaged or lackluster spaces into something a bit more cozy and to our taste. Unfortunately, we’re not Rockefellers, so we’ve had to be very conscious of budgeting money for projects and choosing where to save and where to splurge just a wee bit.

The powder room in our house was a great candidate for a face lift. Here’s a shot before we moved in:

house5

Not bad at all—the brown paint was a lot more intense than it seems in the photo, and the toilet, as in most vacant houses, had seen much better days. There was no mirror, towel bar, or lighting fixture—the bank had sold off these types of things in the entire house. These were some easy fixes.

As the entire house had each room a different color (seriously– avocado green, navy blue, purple, both light and dark, orange, brown, sea foam green, and one in a peachy Venetian plaster faux finish), we chose to have it professionally painted one color before we moved in. With a two story foyer and crazy vaulted ceilings, it was worth it to us to pay to have the whole place painted a neutral color. We could then decide individual room paint colors later on and do this ourselves. We chose Wool Skein by Sherwin Williams- a great, warm neutral color.

wool skein joined

Here’s a shot after the neutral color went on as well as after we put in a new toilet (sorry it’s dark).

step0004

After adding a mirror, lighting fixture, towel bar, and toilet paper holder, the bathroom was fresh and functional. We left it this way for a little over a year and a half as we focused our attention on other spaces.

Since we decorated our living space on the first floor in hues of greens, blues, and creams, it was time to revisit the powder room.  We wanted to coordinate the bathroom with the living space and newly constructed built in entertainment center.

It didn’t take much to further transform this bathroom. I love the look of beadboard in a bathroom, especially in a half bath where there may not be much character in the space. I think pairing blue or gray paint with white beadboard is a classic look (luckily my husband agrees) so our decision was easily made.

We put up the beadboard which was actually fairly easy to do. It is just a matter of cutting the sheet down to size, holding it against the wall, and using a nail gun to secure it in place—definitely a two person job.

Action shot of my hard worker :)

Action shot of my hard worker :)

We then painted the walls from the top down to where the beadboard started. We came close to the top of the beadboard but were not concerned about being perfect as the chair rail would cover this anyway. The paint color is Aloof Gray by Sherwin Williams. It is a lovely color that I would certainly use again in the future.

aloof gray joinedAfter this dried, we installed the chair rail. We gave the chair rail and beadboard two coats of white paint that we had leftover from painting other trim in our house. After cutting/painting some base molding and then quarter round to match the wood floors, we were all set! This entire project took us a weekend to do.

Keeping with the sailing/Annapolis area theme of the basement, I found two photos, one of the Chesapeake Bay Bridge and another of the Thomas Point Shoal Lighthouse. It took a while to find frames that were a good match for the colors in the bathroom. I settled on these Threshold ones from Target:

frame

I just needed a garbage pail and basket for toilet paper, and knew Homegoods was the place to find these. I settled on an antique looking wire basket with burlap lining for our toilet paper holder, and a natural basket for our garbage pail.

Here’s the final product:

P1030510new one P1030520

P1030516

 before after

I’m very happy with how this mini transformation came out. It was not expensive, took little time to do, and was a huge improvement from the dark cave-like space it used to be.

Have any of you given a mini makeover to your spaces lately?

 

 

Take Me Out to the Ball Game Baseball Wreath

Easy Baseball Wreath

 Easy Baseball Wreath

I love a good wreath. and “If you don’t know, now you know,…. ” ( please read/sing this to the tune of “Juicy”).

And if you saw my You’re a Grand Ole Flag Mantel, you know that I have a thing for anything patriotic. To me, baseball is pretty patriotic. After all,  it is America’s Pastime. So, an easy baseball wreath is right up my patriotic wreath-lovin’ alley.

There are some other tutorials on how to make a baseball wreath, but almost all of them suggest drilling holes in the balls, and using a wire hanger. I decided this was not a viable option because the wire will eventually sag, and the wreath will, too.

This one’s a pretty easy wreath to replicate, but you are going to need a whole lot of glue to make this one.

Here’s what you’ll need:

- Baseballs (I used 11)

- Burlap  from http://www.burlapfabric.com

-Gorilla Glue, hot glue, or caulk (clear)

- 12 inch Wire Wreath Frame– You can get one here

baseball wreath

- Ribbon of your choice baseball team/color

- Baseball hat (optional)

Here’s what you’ll do:

- Glue the baseballs to the wire frame. The wreath form has a “cupped” side (like a channel) and a flat side. You want to place the balls in the cupped/channel side (basically, the wreath form side that will hold the balls). I found it helpful to first secure the baseballs to the form with hot glue, and then flip  the wreath over with the wire facing up, and fortify it with Gorilla Glue. hot glue,  or Caulk. Don’t be shy with the adhesive, and don’t worry what it looks like because no one will see the back of the wreath.

- Wrap burlap around the wreath- I wanted my burlap to be a little rustic, so I used scraps and pulled some strands out, so it would fray a bit. The burlap also helps hide the wreath form while securing the balls a bit more.

IMG_5306

- Wrap some decorative ribbon to the wreath.

- Hang it!

IMG_5300IMG_5304IMG_5307

There’s something about the look of used baseballs that I really just love. Am I am the only one?

Beer is Art– Coaster Art

Easy Beer Coaster Art

Does anyone else think that a lot beer coasters recently are quite aesthetically pleasing?  Perhaps it is because I am a sucker for fonts and images, but I have a pile of coasters sitting in my craft closet waiting to become something.

Recently, Carrie my forever friend (remember her ultimate patience from this post? ) gifted me with the motherload of coasters. Immediately upon receiving the box of coasters, another friend of ours,  Megan, and I  began rifling through the box and pulling out cute, funny, beautiful, and nostalgic coasters (Milwaukee’s Best, anyone?). Among the piles, Megan and I both agreed that the New Belgium Brewing Company coasters were quite pleasing to the eye.

IMG_5105 Because there were six different coasters, Megan decided she wanted to have two framed pieces of beer coasters or if you’re fancy, “Beer Coaster Art.”  I was happy to help.

In all honesty, Megan could have done this herself, but she is kind and sweet and flattering, so she insisted that she simply could not do it. I smiled, took the compliment, and whipped up some decor for her walls.

Here’s what I used:

- Burlap from BurlapFabric.com

- Jute Webbing for BurlapFabric.com

-6 Coasters

- Hot Glue

- Two frames

 

Here’s what I did (although, it’s pretty clear what I did (: )

- IMG_5100  – Cut a piece of burlap to fit the mdf board that came with  the frame.

- Glue the burlap to the board.

IMG_5101

- Cut and glue a piece of jute webbing to run down the center of the frame

- Center and glue the coasters to the burlap (I tried to eyeball the correct spacing. If you are a little more planned, then you should probably use a ruler, and do some math, and stuff ).

- Clean the glass to the frame

- Frame it.

IMG_5115

- Done!

IMG_5125

IMG_5123

Megan claimed to like it. What do you think? What cool stuff have you done to your beer coasters? My friend Nicole has a cool idea cooking for some collected coasters, and I cannot wait to see it (and hopefully share her craftiness).

 

 

 

1 5 6 7 8 9 15